Shop Fox W1772 37" Double Drum Sander
Shop Fox W1772 37" 10 HP Drum Sander
Power through large sanding projects in record time.
The W1772 37" 10 HP Drum Sander sands boards and panels up to 4" thick and 36-1/2" wide, using two different abrasive grits in the same pass with the dual 6" sanding drums.
Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency.
The easy-access control panel with a load meter puts everything you need at your fingertips for efficient operation.
Effortlessly access the sanding drums for maintenance with the gas strut-assisted hinged hood.
The emergency stop bar provides an additional layer of safety for peace of mind while operating the sander.
Changing the 6"-wide by-138" long sandpaper is easy and straightforward. Simply remove the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The W1772 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS: Sanding drum motor: 10 HP, 240V, single-phase, 44A Conveyor motor: 1/3 HP, 2.7A Maximum board width: 36-1/2" Maximum board thickness: 4" Minimum board length: 9" Minimum board thickness: 1/16" Feed rate: Variable, 6–18 FPM Sanding belt size: 6" x 138" Drum surface speed: 2800 FPM Drum diameters: 6" Dust ports: (4) 4" Footprint: 32" W x 45" L Overall dimensions: 62" W x 53" D W x 49" H Approximate shipping weight: 1379 lbs. FEATURES: Two-year warranty!! Industrial rubber conveyor belt Easy-access control panel with load meter Variable-speed conveyor State of the art computer-balanced drums 0.020" Table lift with 360° handwheel turn Advanced dust collection Hinged hood with gas struts for easy drum access
Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency.
The easy-access control panel with a load meter puts everything you need at your fingertips for efficient operation.
Effortlessly access the sanding drums for maintenance with the gas strut-assisted hinged hood.
The emergency stop bar provides an additional layer of safety for peace of mind while operating the sander.
Changing the 6"-wide by-138" long sandpaper is easy and straightforward. Simply remove the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The W1772 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS: Sanding drum motor: 10 HP, 240V, single-phase, 44A Conveyor motor: 1/3 HP, 2.7A Maximum board width: 36-1/2" Maximum board thickness: 4" Minimum board length: 9" Minimum board thickness: 1/16" Feed rate: Variable, 6–18 FPM Sanding belt size: 6" x 138" Drum surface speed: 2800 FPM Drum diameters: 6" Dust ports: (4) 4" Footprint: 32" W x 45" L Overall dimensions: 62" W x 53" D W x 49" H Approximate shipping weight: 1379 lbs. FEATURES: Two-year warranty!! Industrial rubber conveyor belt Easy-access control panel with load meter Variable-speed conveyor State of the art computer-balanced drums 0.020" Table lift with 360° handwheel turn Advanced dust collection Hinged hood with gas struts for easy drum access
